Operates with all Dynalyzer II and III high volt units!
$6500 complete with printer and software
Limited availability... call.
The Inspec 201 Digital Display Unit (DDU) is plug compatible with all Dynalyzer II and III high voltage units. A light weight (6.6 pound) unit with full functionality and modern computer circuitry, it is capable of providing digital display of the x-ray voltage and current parameters from the output of the Dynalyzer high voltage unit.
This lightweight unit is reliable, mechanically stable and is readily portable. It is built with the latest state of the art assembly techniques to insure that it survives field use.
The Inspec 201s single line display provides KVP, mA, Time Filament, current, Line Voltage and mR displays. It will initially scan KVP, MA, Time repetitively after an exposure, or the individual parameters may be displayed by pressing the corresponding button. Inspec 201 DDU also provides numeric and graphic printout of the x-ray exposure data. The data is digitized and stores in internal memory. It is printed on a compact thermal printer which is part of the system. The numeric and graphic data may also be downloaded to an IBN compatible PC via its serial port. The supplied PC DOC software provides the download, file creation and display functions.
The size of this unit belies its complexity. Using 8-bit microprocessor and surface mount technology, the Inspec provides the x-ray system installer with the ultimate display for use with a Dynalyzer HVU.
Measurement specifications:
a. tube voltage: 20-190 KVP b. tube current: 1mA to 2amps
2 ranges: Rad and Fluro
0-1999 mA Dynalyzer II and III
0-50 mA Fluror, Dynalyzer III
Also displays MAS or MAP (peak)
c. time: single phase 0-9999 pulses
three phase 0-5999 ms
d. line volts: 100 to 500
e. radiation: optional interface, optional provide for Victoreen 653 and 660-4 proves, 0.1 mR to 1000 mR, 1000 mR/sec
f. filament current 0-10 amps
Dimensions and Weight Display:
12.5" w x 3.5" hx 9"d 6.6#
320mm w x 88mm h x 230mm d 3 kg.
Printer: 4" w x 2.4" h x 166 mm d 1#
100mm w x 62mm h x 166mm d
Cable: 20 ft. long to interface with HVU.
Measurement time:
0.1,1,2 pulse and continuous (fluoro)
Window delay:
0.0.1,0.2,1,2,10,20, pulses
(1 pulse=8.33mS@60hZ)
Oscilloscope delay:
sweep trigger signal delay time: .83 ms, 1.66, 8.33, 16.66, 83.3, 166ms
RS 232 data output, 25 pin D connector
Printer output, via Centronics printer connector
This equipment made in Japan by the Inspec Co. GiCi is the exclusive US-North American distributor
2/2000 Subject to change without notice